Installation Instructions

INSTALLATION
12
Inside Mount — Cassette Shades
■
Mark 4" from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Allow a minimum of 18"
from the motor end for the battery wand. Mount into wood whenever possible.
■
Center the brackets on your marks, then mark each of the
screw holes.
➤
The minimum mounting depth required for PowerView
®
Gen 3 shades with battery wand is 2
1
⁄ 4 ", all other shades
are 1
5
⁄ 8 ".
➤
Fully recessed mounting for PowerView Gen 3 shades
with battery wand is 4
5
⁄ 8 ", 4" for large cassette and 3
1
⁄ 2 "
for small cassette to be flush with the front of window
casement.
IMPORTANT: The front edges of the installation brackets
must be level and aligned to eachother.
■
Drill the screw holes using a
3
⁄ 32 " drill bit.
■
Use a level to check that the mounting surface is level. Shim the brackets if necessary.
Shims are not provided.
■
Attach the installation brackets using the screws provided.
WARNING: Product is heavy. Mount into wood/metal studs or into concrete with
concrete anchors. Drywall anchors are not recommended.
Proceed to “STEP 2 — Install the Shade” on page 19.
Installation Brackets Jamb Jamb
Space EvenlySpace Evenly4" 4"
Minimum 18" for Battery Wand
Motor
End
4"