Installation Instructions

INSTALLATION

STEP 2 — Install the Shade

Standard, Fascia, Pocket and Dual Roller Bracket Shades

Your shade may be standard roll or reverse roll based on your order. For dual roller shades, you

will have one of each. Be sure to orient the shade correctly before installing.

■

Remove the foam insert from the idle end of the shade.

■

Verify the top limit screw is screwed in completely. The

screw will tighten counterclockwise for standard roll and

clockwise for reverse roll.

■

The shade should be wrapped tight with the paper banding

in place. The bottom bar should be positioned just below

the fabric in either the standard or reverse roll position

based on your order.

Wall or

Window

Room

Wall or

Window

Room

Standard Roll

Note: Shade are lowered for clarity. The shade should be wrapped tight with the paper banding in place.

Reverse Roll

Wall or

Window

Room

Dual Roller

Remove

Foam

Insert

Top

Limit

Screw

Reverse Roll

Standard Roll

Bottom

Bar

Paper

Banding

Tube and

Shade

Fabric

Reverse Roll