Installation Instructions
INSTALLATION
22
STEP 3 — Connect the Power Source
NOTE: When power is connected to the motor, a blue LED inside the control button housing
will flash to indicate the shade is ready for operation.
■
Refer to the appropriate page based on your order.
➤
For a battery wand, see below.
➤
For a satellite battery pack, see page 23.
➤
For an optional DC power supply, see page 24.
➤
For an optional DC power supply with daisy-chain connections, see page 25.
➤
For an optional C-size satellite battery wand or large DC supply, see the instructions
that came with the power source.
If You Have a Battery Wand...
■
Snap the battery wand into the battery wand clip on the back of the cassette.
■
Connect the power cable from the
motor to the battery wand.
Proceed to “Testing the Shade” on page 25.
Brackets removed for clarity.
Battery Wand
Battery Wand Clip
Power Cable