Installation Instructions

INSTALLATION
24
If You Have a DC Power Supply...
Connect the Power Supply
■
Plug the power cable from the shade into
the extension cable.
■
Plug the other end of the extension cable
into the DC power supply.
■
Plug the DC power supply into a standard
outlet.
■
Secure the power supply cable using wire
retainers (not supplied). If hiding the cable
behind the shade, make sure it does not
impede the operation of theshade.
■
Space the wire retainers approximately
15" apart along the power supply cable,
as shown.
WARNING: Keep cords and small
parts out of the reach of children.
They can wrap cords around their
necks and STRANGLE. They can
also put small parts in their mouths
and CHOKE.
WARNING: Electric shock and/or a fire hazard may occur if the DC power supply
and cables are not properly installed.
Proceed to “Testing the Shade” on page 25.
Power Cable
from Shade
Extension
Cable
DC
Power
Supply
15"
Maximum
Wire Retainers