Installation Instructions
OPERATION
27
Further Operation and Programming Information
PowerView
®
App Operation
The PowerView
®
App is required to program PowerView Gen 3 shades, remote controls,
gateways, and scene controllers. The App is compatible with Apple
®
and Android
TM
smartphones and tablets. For more information regarding setup and operation using the
PowerView App, please visit https://help.hunterdouglas.com/s/powerview-gen-3-manuals.
PowerView
®
Gen 3 Gateway Operation
The PowerView Gen 3 Gateway is used to control shades in larger projects as well as
integrate PowerView Gen 3 shades with third-party integration systems. For information
regarding programming of PowerView Gen 3 Gateways, refer to the digital PowerView Gen 3
Automation Gateway Guide, available to view and/or download at https://help.hunterdouglas.
com/s/powerview-gen-3-manuals.
PowerView
®
Gen 3 Remote Operation
For more information regarding operation and programming of the PowerView
®
Gen 3 Remote,
refer to the digital PowerView
®
Gen 3 Automation Remote Control Guide, available to view
and/or download at https://help.hunterdouglas.com/s/powerview-gen-3-manuals.
PowerView
®
Gen 3 Scene Controller Operation
For more information regarding operation and programming of the PowerView
®
Gen 3
Scene Controller, refer to the digital PowerView
®
Gen 3 Automation Scene Controller Guide,
available to view and/or download at https://help.hunterdouglas.com/s/powerview-gen-3-
manuals.
Resetting the Shade (If Necessary)
Calibration Reset
The calibration reset is used to recalibrate the shade's travel limits. This action is performed
in the PowerView App.
■
Select Calibrate Shade in the Advanced Options section of the Shade Settings menu in the
PowerView App.
■
The shade will touch off on end limits, then finish in the closed position. When the shade
stops moving, calibration is complete.