Installation Instructions

OPERATION

Install the Standard Bracket Cover (If Ordered)

■

If you ordered standard bracket covers. Install the bracket covers

by aligning the bracket with the channels in the bracket cover and sliding it

onto the bracket.

Install the Fascia Panel

■

Place the top of the fascia panel into the top

indention of the brackets. Rotate the panel

down and snap it into place.

■

Optional. Remove the backing from the

tape on the end caps and press onto the

brackets.

➤

Check that the outer surfaces of the

brackets are flush with the ends of the

panel. If not flush, loosen the brackets

and move the bracket over to make it

flush with the panel.

Install the Pocket Bottom — Pocket Shades Only (Optional)

■

Attach the bottom of the pocket.

➤

Place the bottom into the pocket at an angle.

➤

Hook the bottom to the ledge inside the pocket.

➤

Rotate it down to secure it into place.

Bracket

Cover

Fascia

Panel

Remove

End Cap

Tape

End Cap

Outer Surface

of the Bracket

Flush with the

Ends of the Panel

Brackets/Shade Removed for Clarity