Installation Instructions

INSTALLATION
8
Installation Overview
To install your shade, you will need to perform the following three steps:
STEP 1: Install the brackets and attach additional components
STEP 2: Install the shade
STEP 3: Connect the power source
STEP 1 — Install the Brackets
Identify the brackets for your shade.
■
Installation Brackets for Standard
Shades. An installation bracket is placed
at each end of the standard roller shade.
There are two sizes M and L.
■
Installation Brackets for Cassette
Shades. The number of installation
brackets required varies depending on
the shade width, as shown in thetable.
■
Installation Brackets for Fascia Shades.
An installation bracket is placed at each end of the
fascia.
■
Dual Roller Brackets. An installation bracket is placed
at each end of the dual roller shade.
Standard
Brackets
M
Standard
Brackets
L
Cassette
Installation
Bracket
Shade
Width
Brackets
Required
Up to 36" 2
36
1
/ 8 " – 66" 3
66
1
/ 8 " – 90" 4
90
1
/ 8 " – 115" 5
Fascia
Brackets
Dual
Roller
Brackets