User's Manual

INSTALLATION
8
STEP 2 — Install the Shade
■ Peel back the protective
covering from the top of
the headrail. Leave the
rest of the protective
covering on the front of
the headrail.
■ Position the shade so
that the front faces you.
■ Slide the headrail into
the installation brackets so the edge of the headrail is between the lever and the bracket,
asshown.
■ Firmly push the headrail into each bracket until it clicks and the lever snaps to the right side
of the bracket.
IMPORTANT: Carefully pull on the headrail at each bracket to ensure it is
installedsecurely.
■ Completely remove the protective covering from the headrail.
Attach the Dust Cover (Optional for Outside Mounts)
The dust cover is used to protect the top of the headrail from exposure on outside mounted
shades.
■ Cut the dust cover to desired width.
■ Remove the paper backing on one side of the hook and loop
fastener dots.
■ Apply the dots to the installation brackets on each end of the shades.
■ Remove the remaining paper backing from the dots.
■ Center the dust cover over the top of the shade, above the dots.
■ Press the dust cover down onto the dots.
Headrail
Installation
Bracket
Lever
Slide the Headrail
Between the Lever
and the Bracket.
Remove
Paper
Backing
Overhead View
No Dust Cover
Dots
Dust Cover Installed