User's Manual
INSTALLATION
14
Attach the Magnetic Hold-Down Brackets (Optional)
■ Lower the shade.
■ Place the magnetic hold-down bracket onto the bottom rail just
inside the end cap, oriented as shown.
■ Mark the screw location using the mounting options shown below.
➤ The screw should be placed in the middle of the channel. This
will allow for adjustment.
■ Drill the screw holes using a
3
/
32
" drill bit.
■ Attach the hold-down brackets to the mounting surface using
the screws provided.
Hold-Down
Bracket
Bottom
Rail
Outside Mount
Preferred Alternate
Inside Mount
Preferred Alternate
Adjust bracket
height by
loosening the
screw and sliding
the bracket up or
down.