User's Manual

OPERATION

Problem

The shade raises or lowers unevenly, the bottom rail is not level when fully

raised, or the fabric winds unevenly or starts to rub against one end of the

headrail.

Solution

Keep the bottom rail level while raising the shade. Side-to-side movement while

raising the shade may cause fabric to skew.

Check that the window is square by measuring the diagonals.

Check that the installation brackets are level. Shim to level, if necessary.

If the headrail is level and the window is square, adjust the bottom rail weight.

Adjusting the Bottom Rail Weight

IMPORTANT: Only adjust the bottom rail weight if the fabric does not roll up

straight into theheadrail.

First, release both weight locks. On the back of the bottom rail, insert a ﬂat-

blade screwdriver into the slot in each weight lock and slide

them away from the weight.

Slide the weight, in 1" increments, in the direction the fabric is gathering.

Secure the weight by sliding each lock back in position next to the weight.

Test and, if necessary, adjust again.

Slide Lock to

Release Weight

Weight Weight Lock

Move Weight

Gathered

Fabric

Fabric Roll in Headrail

Bottom Rail