User's Manual
CARE
26
Removing the Shade
■ Move each lever of the installation brackets to the left to release
the shade.
➤ A flat blade screwdriver can be used to move the lever.
CAUTION: Be very careful not to tear or damage thefabric.
➤ If the lever is inaccessible or
inoperable, lower the shade until
you can see the underside of the
bracket. Carefully reach a small
flat blade screwdriver behind the
shade to the tab on bottom of the
bracket between the screw holes.
➤ Push the tab away from the shade
and pull the headrail to release it
from the bracket.
■ Carefully pull the shade to remove it
from the brackets.
Cleaning Procedures
Sonnette
™
Cellular Shades are made from anti-static, dust-resistant materials which repel dirt
and dust. The following options are available if your shade needs cleaning.
CAUTION: Do not steam the shades.
Dusting
■ Regular light dusting with a feather duster is all the cleaning that needed in most
circumstances.
Vacuuming
■ Use a hand-held vacuum with low suction for more thorough dust removal.
Spot-Cleaning
CAUTION: Do not use spot clean treatment on Highline
™
, Textura
™
and Elan
™
Metallic fabrics.
■ Prepare a solution of warm water and a mild detergent.
■ Dampen a clean cloth in the solution and wring it out.
■ Dab the spot with the dampened cloth until it is gone. Do not rub the fabric.
■ Allow the shade to dry in the completely lowered position.
Move Lever to Left
Top View
Installation Bracket
End Cap
Tab
Underside of
Bracket