User's Manual

Battery Replacement:
1. Remove Cover.
Press notch to move cover slightly
clockwise to release and remove cover.
3. Replace Cover.
Position cover over slots. Press notch to
move cover slightly counterclockwise to
lock into position.
U.S. Radio Frequency FCC Compliance
Press notch to move cover slightly
clockwise to release and remove cover.
2. Place Batteries.
Use two CR 2032 3V batteries. Slide one
battery into each compartment and press into
place to fully seat.
Position cover over slots. Press notch to
move cover slightly counterclockwise to
4. Battery Removal
To remove batteries use a small screwdriver or
fingernail to lift
battery and remove from slot.
Use two CR 2032 3V batteries. Slide one
battery into each compartment and press into
To remove batteries use a small screwdriver or
battery and remove from slot.