Manualshelf

User's Manual

ManualsBrandsHunter Douglas Window Fashions ManualsElectronicsThis device is a remote control that will be used to control blinds. It will open, close, lower and raise the blinds.
12345678910
Installation
SURFACE MOUNT
1. Remove back cover from the switch.
2.
Use the mounting screws supplied with the switch to secure the
back cover to the wall.
3. Place the switch assembly over the back cover, top first.
4. Press the bottom edge of the switch assembly over the bottom
of the back cover until the bottom locking tab is secure.
5. Install faceplate over switch assembly.
Note: The Platinum wireless wall switch may also be flush-mounted.
Use a low voltage electrical retrofit ring or electrical junction box for
installation. Check local electrical codes for proper installation.
4 hunterdouglas.com
Installing the wireless wall switch as a surface mount.