User's Manual

Operating RF Groups
hunterdouglas.com 7
TRAVERSE THE WINDOW
COVERING TO THE OPEN
POSITION
1. Press the GROUP number
for the window covering(s)
you wish to operate.
(GROUP button turns
SOLID GREEN)
2. Press the UP button.
PowerGlide
®
2.0 Operating System
TRAVERSE THE WINDOW
COVERING TO THE CLOSED
POSITION
1. Press the GROUP number
for the window covering(s)
you wish to operate.
(GROUP button turns
SOLID GREEN)
2. Press the DOWN button.
TILTING THE VANES (Only available for Luminette
®
Privacy Sheers)
1. Completely traverse the sheer closed by following the
instructions above.
2.
Press the GROUP number for the sheer(s) you wish to operate.
(GROUP button turns SOLID GREEN)
3. Press and hold the UP or DOWN button to tilt the vanes. Once
the vanes have reached the desired position, release the button.
ALL GROUPS BUTTON
To operate all four groups of window coverings at the same time,
press the ALL button before pressing the UP or DOWN button.
TO STOP A WINDOW COVERING IN MOTION
1. Press the GROUP number for the window covering(s) you wish
to operate.
(GROUP button turns SOLID GREEN)
2. For window coverings that are TRAVERSING CLOSED press the
UP button. For window coverings that are TRAVERSING OPEN
press the DOWN button.
TIP 1 Wait four seconds between button presses.
NOTE: Wireless wall switch will only operate PowerGlide products
manufactured after September 7, 2008.