User's Manual

ManualsBrandsHunter Douglas Window Fashions ManualsElectronicsThis device is a remote control that will be used to control blinds. It will open, close, lower and raise the blinds.

1

2

3

4

5

6

7

8

9

Removing Window Coverings from a RF Group

PROGRAM MODE

Remove the back cover of the

wireless wall switch.

Use a paper

clip to press and quickly release

the PROGRAM button on the

back of the switch. The ALL

button on the front of the

switch will BLINK GREEN (for

approximately 30 seconds).

GROUP NUMBER

While the ALL button is BLINKING

GREEN,

press the GROUP number

from which you are removing

the window covering.

DOWN BUTTON

Point the switch at the IR receiver

eye (built into the headrail or

satellite eye) of the window

covering and press the DOWN

button.

The unit will lower or “jog”

to show that it has been removed.

EXIT PROGRAM MODE

Press the PROGRAM button a

second time to exit Program

Mode.

The ALL button on the

front of the switch will turn off.

1

2

3

BEFORE YOU BEGIN

Partially lower, traverse or tilt the window covering to ensure

functionality

.

4

RESET BUTTON

To erase all programmed

groups,

use a paper clip to

quickly press and release the

RESET button located next to

the batteries. NOTE: The ALL

button will FLASH GREEN

twice.

8 hunterdouglas.com