Manualshelf

User's Manual

ManualsBrandsHunter Douglas Window Fashions ManualsElectronicsThis device is a remote control that will be used to control blinds. It will open, close, lower and raise the blinds.
12345678910
Cloning
hunterdouglas.com 9
1. Collect both the Source Remote or Wireless Wall Switch
(already programmed), and the Target Wireless Wall Switch
(new switch accepting program).
2. Remove the back cover from the Target Switch.
3. Use a paperclip to press and hold the RESET button on the
Target Switch for approximatley 10 seconds. The ALL button
will blink GREEN.
4. Place the Source Remote within 18" of the Target Switch.
5. Press the UP button on the Source Remote. The GROUP
and ALL buttons on the Target Switch will stop blinking.
TIP 1 Any subsequent programming changes performed
after cloning, with either remote or wireless wall switch,
will affect BOTH the Source Remote and Target Switch.
SOURCE REMOTE
(PROGRAMMED)
TARGET WIRELESS
WALL SWITCH
TARGET WIRELESS
WALL SWITCH
SOURCE WIRELESS
WALL SWITCH
(PROGRAMMED)
18"
OR LESS
18"
OR LESS