RKHD Heavy-Duty Power Rack For Alignment and General Service Innovative Features for Safety and Versatili ty Make Heavy-Duty A lignment Fast and Easy
RKHD Heavy-duty power rack Easy-to-use, drive-on style rack offers the benefits of a pit rack without the cost An un sectio wheel Super-wide 33-inch runways make drive-on/drive-off easy and safe. Recessed pockets are ready for optional turnplates. Adjustable front wheel stops provide clearance during vehicle service operations. Super-strong truss-design runways provide 20,000 lbs. per axle capacity Legs bolt directly to the bay floor for maximum strength.
An unlimited number of runway sections can be added to increase wheelbase capacity. 8° approach angle for drive-on clearance. Non-skid surface helps prevent wheel-spin. Inside rub-rails help prevent smaller vehicles from driving off the sides of the runways. Pop-up ramps add wheelbase capacity while making efficient use of bay space. Automatic wheel stops engage when ramps are raised to up position. Ramp legs safely lock in over-center position at maximum rise. ways pacity.
Specifications and configurations Max. vehicle gross weight: Drive-on height: Runway width: Overall width: Distance between runways: Overall length: (Standard configuration) Length of modular runway section: Approach ramp angle: Power requirements: 20,000 lbs. (9,072 kg) per axle 24 in. (610 mm) 33 in. (838 mm) 106 in. (2,692 mm) 40 in. (1016 mm) (Installed width can be varied) 403 in. (10,236 mm) 46 in. (1168 mm) 8˚ 220V, 1ph., 20A The RKHD fits a wide range of vehicle applications.