Specification Sheet

SPECIFICATIONS
RKHD Heavy Duty Alignment Pit System
Pit Rack
Site Specications
Pit Construction Refer to Forms 5097-T and 5004-T
Minimum Concrete Spec. 4 in. (102 mm) thick, 3000 PSI (20700 kPA) rating
New Floor Concrete Spec. 6 in. (152 mm) thick, 3000 PSI (20700 kPA) rating
Pre-Installation Kit Required before pouring pit.
Pit Contractor Pre-Pack None Available
Pit Edging Field Fabricated / Purchased
Product Specication
Max. Axle Weight 20,000 lbs. (9072 kg)
Rear Axle Jack Rail Typically N/A, rails available for opt. jack tray
Track Width
(inside and outside width)
Fixed Runway, Typical Spacing
40 - 106 inches (1016 - 2692 mm)
Pit Depth (nominal) 24 or 30 inches (610 or 762 mm)
Adjustable Legs
(accomodates oor slope)
3 1/2 inches (89 mm) longer than nominal
2 1/4 inches (57 mm) shorter than nominal
RKHD Pit Turnplates
Form 6947-T, 03-15b
Copyright © 2015, Hunter Engineering Company
For lift rack information visit:
www.hunter.com/rack
For local contact visit:
www.hunter.com/company/ndrep.cfm
For general inquiries visit:
www.hunter.com
or call
800-448-6848
MODEL COMPARISON
Continued on Page 2
RKHD Pit Illustration
TURNPLATE
SECTION
MODULAR
RUNWAY
SECTION
(three pairs within
shown example)
PIT ADAPTOR
(secures runway to
pit back wall)
Features
PT PF RKHD PE P44x
Capacity
Heavy Duty
18,000 lbs. / axle
(8165 kg)
Heavy Duty
18,000 lbs. / axle
(8165 kg)
Heavy Duty
20,000 lbs. / axle
(9072 kg)
Meduim Duty
10,000 lbs. / axle
(4535 kg)
Light Duty
18,000 lbs. Total
(8165 kg)
Axle Jack Rail
optional
T-Pit
optional
jack tray
N/A
Work Beam
N/A N/A N/A
Pit Depth
58 in.
(1473 mm)
58 in.
(1473 mm)
24 or 30 in.
(610 mm or 762 mm)
36 in.
(914 mm)
36 in.
(30 & 24 in. available)
(914, 762 or 610 mm)
Track Width
(inside - outside width)
Adjustable Runways
48 in. - 120 in
(1219 mm - 3048 mm)
Adjustable Runways
48 in. - 120 in
(1219 mm - 3048 mm)
Fixed Runways
40 in. - 106 in.
(1016 mm - 2692 mm)
Adjustable Runways
48 in. - 120 in
(1219 mm - 3048 mm)
Fixed Runways
40 in. - 85 in.
(1016 mm - 2159 mm)