Manual

PROGRAMMING

Setting Time and Day

■ The LCD will show this information when batteries

are first installed, or after the Reset button is

pressed. The temperature will update after a few

seconds.

■ During time and day setting mode, the temperature

and program displays will go blank.

■ Example: Set the Thermostat to the current time of

2:16 pm on Saturday. Refer to the Steps below.

STEP 1: ■ Press to enter time and day setting mode. The cur-

rent hour and the AM / PM indicator will be flashing.

■ Press to change the Hour up or down to the

current hour.

Note the AM / PM indicator, as the display will

change at 12 AM and 12 PM.

STEP 2: ■ Press again to change from hour setting to minute

setting. The current minute will be flashing.

■ Press to change the Minute up or down to the

current minute.

TEMP

day/time

41659_model47350A_web.pmd

STEP 3: ■ Press again to change from minute setting to day

setting. The current day will be flashing.

■ Press to change the Day up or down to the

current day.

STEP 4: ■ Press again to change back to the

normal display.

NOTE:

You may press

hold

/return

at any time during Day and Time setting to return to the

normal display.

DAYLIGHT SAVING TIME

■ Press and hold.

■ Press to enter Daylight Saving Time.

TEMP

day/time

hold

/return

TEMP

SA SET TEMP

day/time

(continued)