Installation & Assembly

1886

Installing the Blades:

Repeat x5

Installing the Bulb and Glass

Lightly attach the blade arms to the

motor with the blade arm screws,

then securely tighten after both

screws are attached.

Repeat x5

x10

bag

Blade Arm Screw

Assembling the Light

x15

bag

Blade Screw

x15

bag

Blade Nut

Secure each blade to a blade iron as shown using the blade nuts, found in the

hardware bag, and the blade assembly screws, found in the hardware bag.

Installing the Motor Housing

STEP

Raise the motor housing up over the motor and ceiling

bracket. Turn the motor housing so the screw holes align

and the indentation in the housing locks into place with

the notch in the ceiling bracket. The motor housing is

not secured until the next step is complete. Do not

leave unattended.

With a Phillips head screwdriver, install

the four motor housing screws found in

the hardware bag. Tighten all four

screws securely.

bag

Notch

Indentation

Motor Housing

Screw

Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Remote Remote Cradle Troubleshooting