User's Manual

13
45056-01 • 10/02/09 • Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8. First install included 13W CFL bulbs into the sockets.
7-9. read the light and fan pull chains through the hole in the center
of the glass bowl. en, thread the light pull chain through the hole
in the center of the cover plate.
7-10. read the fan pull chain through the grommet hole in the side of
the cover plate.
7-11. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
7-12. read the light pull chain through the nial and screw the nial
onto the threaded rod end until
tight.
7-13. Attach the extra pull chains
(included) to the light and fan
pull chains using the plastic
breakaway connector. (You
may nd the plastic breakaway
connector on the end of the extra
chain.)
Breakaway
Connector
For Light Bulbs
Metal Rod
Metal Disc
Glass Bowl
Cover Plate
Finial
CFL bulb