Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 1 of 18 Models: K6927, K6731, K6300 Rev. 0.
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 2 of 18 Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee Revision History Revision Date Initiator Description 0.1 16Aug2016 Charles Mckee Initial Draft 0.2 23Sep2016 Charles Mckee Updated K6927 ID Scope: This document establishes the performance, design, test, and acceptance requirements for the above Electronic Control Module (ECM).
Confidential Page 3 of 18 PRODUCT SPECIFICATION 2017 Wall Controls Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee TABLE OF CONTENTS I. GENERAL DESCRIPTION 4 II. BENEFITS 4 III. FUNCTIONAL SPECIFICATIONS 5 V. ELECTRICAL SPECIFICATIONS 7 VI. RF SPECIFICATIONS 9 VIII. REGULATORY SPECIFICATIONS 13 IX. ENVIRONMENTAL SPECIFICATIONS 13 X. QUALITY 13 XI. DESIGN TEST REQUIREMENTS 15 XII. FACTORY TEST REQUIREMENTS 15 XIII. WARRANTY PERIOD 15 XIV. SAFETY 16 XV.
Confidential Page 4 of 18 PRODUCT SPECIFICATION 2017 Wall Controls Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee I. General Description The 2017 Wall Controls are 7-button remote controls intended for use with platform ECMs (generation 1.9 and 2.0). These wall controls have a mains disconnect connect switch incorporated and are intended to take the place of the fan’s main power switch.
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 5 of 18 Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee III. Functional Specifications A. SIMPLEconnect Handheld Remotes (Hunter and Casablanca): 1. Fan Control – There will be 3 buttons on the remote that can be used to control the functions of the fan. a) FAN TOGGLE Function: A press/release of the FAN “ ” button will toggle the fan state between OFF and ON (last state).
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 6 of 18 Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee f) FAN COUNTER CLOCKWISE Function: A long hold of both the FAN “ ” and FAN DOWN “▼” buttons will change the direction of the fan to counterclockwise (downdraft). If the fan is already in downdraft, then there will be no change. 2. Lighting Control – There will be 3 buttons on the remote that can be used to control the functions of the light.
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 7 of 18 Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee (2) IF the light is OFF, pressing the FAN DOWN “▼” button will not change the light state and it will remain OFF. (3) Holding the LIGHT DOWN “▼” button will change the light state to the lowest intensity (LIGHT MIN).
Confidential Page 8 of 18 PRODUCT SPECIFICATION 2017 Wall Controls Models: K6927, K6731, K6300 Hunter Fan Company Confidential 8 Rev. 0.
Confidential Page 9 of 18 PRODUCT SPECIFICATION 2017 Wall Controls Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee V. RF Specifications A. The operating RF (Radio Frequency) for the Handheld Remote is 433MHz. B. The following transmission range for handheld remote & wall control is: 1. Receiver located on bench in the lab >100 ft. 2. Receiver assembled in ceiling fan > 75 ft.
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 10 of 18 Models: K6927, K6731, K6300 VI. Mechanical Specifications A. K6972 Casablanca Wall Control 1. K6927 Assembly Exploded View 2. K6972 Industrial Design Hunter Fan Company Confidential 10 Rev. 0.
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 11 of 18 Models: K6927, K6731, K6300 B. K6731 Hunter Wall Control 1. K6731 Assembly Exploded View 2. K6731 Industrial Design Hunter Fan Company Confidential 11 Rev. 0.
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 12 of 18 Models: K6927, K6731, K6300 C. K6300 THD Wall Control 1. K6300 Assembly Exploded View 2. K6300 Industrial Design Hunter Fan Company Confidential 12 Rev. 0.
Confidential Page 13 of 18 VII. PRODUCT SPECIFICATION 2017 Wall Controls Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee Regulatory Specifications A. Units must conform to UL 991 and UL244A as required. B. FCC part 15 C. IEC 60730-1 Automatic Electrical Controls – General Requirements D.
Confidential Page 14 of 18 PRODUCT SPECIFICATION 2017 Wall Controls Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee A. The development of this product must adhere to the latest revision of the Hunter Fan Company Control Product Approval Plan. B. Quality Parameters: All products must be fit for function. Any deviations from the Product Specification will be considered a defect and will cause rejection of the product by Hunter Fan Company.
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 15 of 18 Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee X. Design Test Requirements A. Life Testing: 1. ALT (Accelerated Life Testing) a) A sample size of 30 units must be subjected to the following test conditions for a total of 5 weeks: (1) 5ºC / R.H.40% +/- 5% for 1 hour (2) Ramp/transition to 85ºC / R.H. 90% for 1 hour (3) 85 ºC / R.H. 90% +/- 5% for 10 hours (4) Ramp/transition to 5 ºC / R.H.
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 16 of 18 Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee XIII. Safety A. Agency Requirements: All units must conform to the appropriate agency requirements for intended country of sale. Agency requirements are specific to both the product in question and the country where it is sold. Products intended for commercial or industrial use must conform to country and universal safety standards where applicable. B.
Confidential PRODUCT SPECIFICATION 2017 Wall Controls Page 17 of 18 Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee 1. Clamshell Packaging per Current Standards a) K6672-01 THD Wall Control Assembly (1) Paired to the ECM in Factory F. Physical Packaging: The physical design of the internal packaging, external dimensions, and materials are to be designed by the vendor and approved by Hunter Fan Engineering. Any packaging artwork is to be supplied by Hunter Fan Company. G.
Confidential Page 18 of 18 PRODUCT SPECIFICATION 2017 Wall Controls Models: K6927, K6731, K6300 Rev. 0.2 23Sep2016 Written by: Charles Mckee D. Crystal E. ASIC (AyDeeKay Heimdall Slave) F. Battery Holder and Wire Leads G. 120V Switch H. LEDs XVII. Reference Documents A. Hunter General Control Specification F4049 B. Hunter R&D-22 Electronic Fan Control NPD Procedure Rev 0 C. Hunter R&D-20 test procedure D. Test Request Form F4086 E. Standard Audit Procedure, QA-FG F.
