User's Manual

Confidential PRODUCT SPECIFICATION
2017 Wall Controls
Rev. 0.2
23Sep2016
Page 14 of 18 Models: K6927, K6731, K6300 Written by:
Charles Mckee
Hunter Fan Company Confidential 14
A. The development of this product must adhere to the latest revision of the
Hunter Fan Company Control Product Approval Plan.
B. Quality Parameters: All products must be fit for function. Any deviations from
the Product Specification will be considered a defect and will cause rejection of
the product by Hunter Fan Company. First Article Inspection reports must be
submitted to Hunter Fan for all parts & tools. A complete first article packaged
unit is to be accepted by Hunter Fan Engineering & Quality and archived.
C. Product life expectancy is 3 years, based on 8,000 hours usage per year.
D. Quality Inspection: The product must comply with the requirements in the
previous sections and will be checked by the Standard Audit Procedure
for Controls supplied by Hunter Fan Company Quality. Hunter Fan
Company Engineering and Quality may amend the procedure at any time.
E. Cosmetics: The product must meet the Hunter Fan Company Aesthetic
Requirements document QA-AR.
F. Workmanship: All parts must meet the latest revision of IPC-A-610,
"Acceptability of Electronic Assemblies".
G. Packaging: Hunter F4045, Packaging Construction.
H. Performance: Any deviation from these requirements is considered a critical
defect and will require immediate corrective action.
I. Drawings: All piece parts used in the manufacturing of the product must meet
the dimensions and the specifications outlined on their respective piece part
drawings. A set of drawings must also be kept at Hunter Fan Company. All
drawings must include material and applicable performance specifications for the
given part. All information must be included in English and dimensioning units
and tolerances must be clearly shown on the drawings.
J. Literature: All instructions, warranty cards and other literature must be
legible, complete, in place and free of blemishes, tears, color mismatch, blank
pages, wrinkles and contamination.
K. Reliability: The packaged product must meet the International Safe Transit
Association Transportation Test.
L. Material Certification: Vendor must supply a Material Certification of
Compliance for all critical components. Components cannot deviate from design
without approval of Hunter Fan Company.