User's Manual

Confidential PRODUCT SPECIFICATION
2017 Wall Controls
Rev. 0.2
23Sep2016
Page 6 of 18 Models: K6927, K6731, K6300 Written by:
Charles Mckee
Hunter Fan Company Confidential 6
f) FAN COUNTER CLOCKWISE Function: A long hold of
both the FAN “” and FAN DOWN “▼” buttons will change
the direction of the fan to counterclockwise (downdraft). If the
fan is already in downdraft, then there will be no change.
2. Lighting Control – There will be 3 buttons on the remote that
can be used to control the functions of the light.
a) LIGHT TOGGLE Function: A press/release of the LIGHT
“” button will toggle the light state between OFF and ON
(last state).
b) LIGHT DIM INFINITE Function – A long hold of the
LIGHT “” button will initiate the sinusoidal dimming
function. There are some special conditions outlined as
follows:
(1) If the light is OFF or at minimum light output, this
function will illuminate the light until the button is
released or maximum illumination is reached.
(2) If the light is in any state besides OFF or minimum
illumination, this function will begin dimming the light.
When the light reaches minimum illumination, it will
begin illuminating until the button is released or the
maximum light output is reached.
c) LIGHT INCREASE Function: A press/release of the
LIGHT UP “▲” button will increment the light intensity. There
are some special conditions outlined as follows:
(1) If the light is at full intensity, pressing the LIGHT
UP “▲” button will not change the light state and it will
remain and full intensity.
(2) Holding the LIGHT UP “▲” button will change the
light to full intensity (LIGHT MAX).
d) LIGHT DECREASE: A press/release of the LIGHT DOWN
“▼” button will decrement the light intensity. There are some
special conditions outlined as follows:
(1) If the light is at its lowest intensity, pressing the
FAN DOWN “▼” button will turn the light OFF.