Owner's Manual

MOUNTING THE WVC TO A HUNTER VALVE .............................................

The WVC can easily be mounted on any Hunter plastic

valve. A special designed valve mounting clip makes instal-

lation a snap.

NOTE: When mounting the WVC, position

the antenna vertical and as high as pos-

sible in the valve box to achieve maximum

range for radio communication.

To mount the WVC to a valve (Figure 2):

1. Unscrew the existing solenoid from the valve.

2. Screw the WVC latching solenoid into the valve bonnet.

3. Attach the large end of the valve mounting clip to the

middle of the WVC body (mounting clip supplied with

your WVC).

4. Snap the small end of the valve mounting clip to the

solenoid.

NOTE: The total length of wire from the

WVC to the solenoid should not exceed

100 ft.

Figure 2