Owner's Manual

ALTERNATE MOUNTING METHODS ............................................................

A universal mounting clip and mounting adapter are also

provided with the WVC. These accessories provide for

alternate methods of mounting the controller either to the

side of the valve box or stake mounted within the valve box.

Valve Box Mounting Method (Figure 3)

1. Position the universal mounting adapter on the side of

the valve box. Make sure that the bracket is positioned

so that the controller is as high up in the valve box

as possible, but does not interfere with the top of the

valve box cover.

2. Drive two screws to secure the adapter to the side of

the valve box.

3. Attach the WVC to the mounting clip and slide it on the

end of the mounting adapter.

Stake Mounting Method (Figure 4)

The universal mounting adapter can also be used to stake

mount the WVC.

1. Cut a section of " (13mm) diameter plastic pipe.

2. Drive the pipe into the ground inside the valve box to

position the WVC to the desired height.

3. Slip the universal mounting adapter on top of the pipe.

4. Attach the WVC to the mounting clip and slide onto the

adapter.

Figure 4

Figure 3