Owner's Manual

WVC COMPONENTS........................................................................................

This section provides a brief overview of some of the com-

ponents of the WVC. Each item will be discussed in further

detail later, however, this section can be helpful in getting

acquainted with the different options available.

1. WVC Body – The WVC controller is designed to be dirt

tolerant, waterproof, and submersible to 12 feet.

2. External Antennae – Flexible rubber antennae for radio

communication.

3. 9-Volt Battery Holder – The WVC is designed to oper-

ate on a single 9-volt alkaline battery. The battery easily

snaps into the battery holder.

4. Wires for DC Latching Solenoids – Leads are provided

for wiring DC latching solenoids. The red wires are

numbered on top of the WVC to provide station identifi-

cation. The black wire is the common wire.

5. Weather Sensor Wires – A Hunter Mini-Clik

or other

micro-switch type sensor can be connected to the WVC.

6. Valve Mounting Clip – Allows the WVC to be mounted

directly to any Hunter valve. The clip can also be used

in conjunction with the Universal Mounting Adapter.

7. Universal Mounting Adapter – Allows for alternate

methods of mounting the WVC. It can be used to

mount the WVC to the side of the valve box or on a "

(13 mm) diameter section of plastic pipe.

8. LED Indicator Light – Used when setting the WVC

address.