User's Manual

10
Setting the Run Time (Length of Watering)
1. Press the button until the
Run Time icon is displayed.
2. The display will show the
station number and the last
run time entered will be
blinking.
3. Use the or button to
change the station run time
on the display from 1 minute to 4 hours.
4. Use the button to navigate the next station.
5. Repeat steps 3 and 4 for each station.
Setting Days to Water
1. Push the button until the Water Days icon is dis-
played.
2. For each station, the WVP will display either specific
days to water or interval watering.
Selecting Specic Days of the Week to Water
For specific day of the week
watering, the station number and
7 days of the week with a icon
or a icon above the numbered
day will be displayed. The icon
would represent an “ON” water-
ing day, while the icon would
represent an “OFF” watering day.
1. Press the button to navigate to the desired station.
2. With the cursor on a specific day (the cursor always
starts with 1), press the button to activate a par-
ticular day of the week to water. Press the button to
cancel watering for that day. After pressing a button the
cursor automatically advances to the next day.
3. Repeat step 1 until all desired days have been selected.
The selected days will show with a to indicate their
status “ON”. The last is the last watering day for the
program.
4. Repeat steps 1 through 3 for each station.
PROGRAMMING THE WVP (continued) ......................................................