User's Manual

NOTE: If specific days of the week watering

is selected, make sure the specific days to

water mode is displayed prior to navigating

to the next station.

Selecting Interval Watering

With this option you can select

interval watering from1 to 31

days.

1. Use the button to navi-

gate to the desired station.

2. With the cursor on day 7,

press the button once.

The interval watering icon

will be displayed along with the interval (flash-

ing).

3. Press the or button to select the number of

days between watering days (1 to 31). This is called the

interval. Pressing the at anytime during the interval

setup will advance back to specific days of the week to

water.

NOTE: If interval watering is selected, make

sure the interval mode is displayed prior to

navigating to the next station.

The controller will water the next Start Time and will then

water at the interval programmed.

System Off

The system off function will turn

your WVC controller off, stop-

ping all automatic watering until

turned back on with your WVP.

To turn the WVC off:

1. Use the button until the

off icon is displayed. After

flashing for a few seconds,

the word “OFF” will appear in the display.

2. Squeeze the Transmit/Receive button on the WVP once

to move to communication mode (lower part of LCD),

use the and buttons to make sure the arrow is

pointed toward the WVC icon, then squeeze and hold

the Transmit/Receive button on the WVP. The WVP will

beep twice indicating that the “OFF” command is being