Instructions / Assembly

8
5 • Installing the Canopy
WARNING: Fan may fall if not assembled as directed in these
installation instructions.
Standard Mounting
Note: e lower canopy, along with the sleeve & gaskets, must
be raised first so that the upper canopy can secure to the
sleeve.
5-1. Raise the lower canopy, along with the decorative sleeve and two
gaskets, so that the lower edge is even with the upper edge of the
motor housing. Securely install the setscrews in the lower canopy
and metal gasket.
5-2. Raise the upper canopy, leaving 1-2 mm of space between the rim
of the canopy and the ceiling, and securely install the setscrew.
Low Profile Mounting
5-3. Raise the canopy, leaving 1-2 mm of space between the rim of the
canopy and the ceiling, and securely install the setscrew.
Step 5-2
Step 5-1
Hunter® Fan Company 43113-01 • 04/13/07
Step 5-3