Use and Care Manual

14
42441-01 • 06/14/11 • Hunter Fan Company
Light Kit
Housing
Assembly Screw
Housing
Assembly Screw
Steps 8-5 – 8-6
8-5. To attach the light kit, connect the upper plug connector from the
motor to the lower plug connector in the light kit.
Note: Both plug connectors are polarized and will only t together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
8-6. Place the light kit over the light kit top housing. Align the holes
in the light kit top housing with the light kit. Attach the light kit
to the light kit top housing with three housing assembly screws.
Tighten all three screws rmly.
8 • Completing Your Installation With a Bowl Light Fixture (Continued)
Plug
Connector
Detail