Instructions / Assembly

6
42845-01•01/23/08•HunterFanCompany
3-1.Findtheloopedendofthebraidedcableandinsertitthroughthe
ceiling plate and one of the holes in the outlet box into the ceiling.
3-2.Accessthesupportbraceintheceiling.Youmaynotbeabletodo
this from below the ceiling depending on your installation site.
3-3.Driveawoodscrewandwasherintothesideofthebracethat
holdstheoutletbox.Leave3mm(1/8”)ofspacebetweenthe
support brace and the washer.
3-4.Wrapthebraidedcablearoundthesupportbraceoncecreatinga
complete circle.
3-5.Hooktheloopedendofthecableoverthewoodscrewsothatthe
braided cable lies between the washer and the support brace.
3-6.Tightentheloopandsecurethescrewandwasheralltheway
down to the support brace.
3-7.Coiluptheexcesscable.
3-8.Returntothefansoyoucancompletethefanwiring.
Step 3-1
3mm (1/8")
Steps 3-2 – 3-3
Steps 3-4 – 3-5
Steps 3-6 – 3-7
Support
Brace
Ceiling
OutletBox
Braided
Cable
3 • Securing Fan to Secondary Support System