Marine II Outdoor Light Kit Owner’s Guide and Installation Manual Manual De Propietario English Español Form# 43552-01 20140415 ©2014 Hunter Fan Co.
Welcome Your new Hunter® light kit is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your light kit. We are proud of our work. We appreciate the opportunity to supply you with the best products available anywhere in the world. Before installing your light kit, for your records and warranty assistance, record information from the carton and Hunter nameplate label.
Installation Methods of Hunter® Ceiling Fans Type A-Z Your ® light kit can be installed in one of three ways. The steps in this manual include instructions for all three installation methods: Installation on fans with removeable switch housings, fans with non-removeable switch housings, and The Hunter Original. Preparing the Light Kit: 1. Disconnect power by turning off the circuit breakers both to the outlet box and to its associated wall switch location.
1 • Installing the Light Kit on Fans With Removable Switch Housings 1. 2. 3. 4. 5. 6. 7. 8. Unscrew the three screws from the upper switch housing. Disconnect the 9-pin plug connectors. Remove the lower switch housing. Push the plug button from inside the lower switch housing to remove the plug button and switch housing cap. NOTE: Save the plug button and switch housing cap should you choose to remove the light fixture in the future.
2 • Installing the Light Kit on Fans With Non-Removable Switch Housing 1. Uninstall the two attachment screws from the switch housing cover. 2. Remove the plug or screw from the center of the switch housing cover. 3. Thread the switch housing cover onto the upper light housing. Align the screw holes in the upper light housing with the screw holes in the switch housing cover. Install the nut and washer onto the threaded rod from the light kit to secure the switch housing cover. 4.
2 • Installing the Light Kit on a Non-Removable Switch Housing (cont.) 8. Attach the light fixture to the switch housing with the two screws included with the light fixture, aligning the holes in the light fixture, switch housing cover, and switch housing. 9. Securely tighten the two screws. 10. Go to the instructions for Installing the Bulbs, Chains, and Globe.
3 • Installing the Light Kit on the Hunter Original 1. Uninstall the two screws from the switch housing plate. NOTE: Save the switch housing cap should you choose to remove the light fixture in the future. 2. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here” or “For Light Use.” One wire is white and the other wire is black wire with a white stripe. Thread the two wires through the hole in the center of the light fixture. 3.
4 • Installing the Light Kit on a Fan with a Removable Switch Housing Cap 1. Uninstall the two attachment screws from the switch housing cap. 2. Align the screw holes in the included two additional gaskets with the screw holes on the top of the light kit. 3. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here” or “For Light Use.” One wire is white and the other wire is blue. 4.
5 • Installing the Bulbs, Chain, and Globe 1. Install the included CFL medium-based bulbs. 2. Align the screw holes in the globe assembly with the screw holes in the light kit mounting plate. Make sure that the U-shaped hole in the globe assembly aligns with the pull chain assembly. 3. Attach the globe assembly to the light kit mounting plate using the preinstalled screws. Tighten the screws securely to the light kit mounting plate. 4.
6 • Troubleshooting Troubleshooting Light does not come on. 1. Make sure bulbs are installed properly. 2. Make sure breakers or fuses are on. 3. Verify that the light power lead is connected at the ceiling. Refer to your ceiling fan manual for locating assembly and wiring. Glass rattles. 1. Make sure the plastic globe is secure. If you need parts or service assistance, please call 888‑830‑1326 or visit us at our Web site at http://www.HunterFan.com.