User Manual

5
43550-01 • 06/10/10 • Hunter Fan Company
9. Install the included CFL light bulbs into the lamp sockets.
10. Remove the lower chain extension from the light fixture by unhooking it from the breakaway connector.
Leave the breakaway connector in place on the upper chain.
11. read the light pull chain through the hole in the center of the glass bowl. Place the glass bowl on the
threaded rod until flush against the metal disc.
12. Place a cover plate (with no side hole) up against the glass bowl. read the light pull chain through the
center opening of the cover plate.
13. read the light pull chain through the finial and screw the finial onto the threaded rod until tight.
14. e installation is complete and you can restore power to the light fixture.
1 • Installing the Light Kit on the Ceiling (contintued)
Cover
Plate
Light Pull
Chain
Finial
Steps 11-14