Use and Care Manual

42441-01 • 04/19/11 • Hunter Fan Company

7 • Assembling the Blades

Blade Assembly

Screws

Use with grommet

Use without grommet

Step 7-1 (Detail)

Grommet

Hunter fans use several styles of fan blade irons (brackets that hold the

blade to the fan).

7-1. Install the grommets into the blades by hand.

7-2. Place each blade between a blade iron and medallion. Install three

blade screws to attach the medallion to the blade iron. Repeat for

all blades.

7-3. Remove the blade mounting screws and metal shipping ring from

the bottom of the motor. Note: Some blade mounting screws are

installed in the motor to secure the metal shipping ring.

7-4. For each blade iron, insert one blade mounting screw through the

blade iron, and attach loosely to the fan. Insert the second blade

mounting screw, then securely tighten both mounting screws.

Blade

Mounting

Screw

Steps 7-1 – 7-2

Step 7-4

Blade Mounting

Screws

Blade Iron

Step 7-3