Use and Care Manual

42441-01 • 06/14/11 • Hunter Fan Company

Your Hunter fan comes with an integrated light xture assembly.

WARNING: Use only the light xture supplied with this fan model.

8-1. To attach the light kit top housing, partially install two housing

assembly screws into the light kit mounting plate.

8-2. Feed the upper plug connector through the center opening of the

light kit top housing.

8-3. Align the keyhole slots in the housing with the housing assembly

screws.

8-4. Turn the light kit top housing counterclockwise until the housing

assembly screws are rmly situated in the narrow ends of the

keyhole slots. Install the remaining screw into the housing. Tighten

all three screws rmly.

CAUTION: Make sure the light kit top housing is securely

attached to the light kit mounting plate. Failure to properly attach

and tighten all three assembly screws could result in the light kit top

housing and light xture falling.

Steps 8-1 – 8-3

Housing

Assembly

Screw

Light

Kit Top

Housing

Remaining

Screw

Upper Plug

Connector

8 • Completing Your Installation With a Light Fixture