Use and Care Manual

17
42441-01 • 06/14/11 • Hunter Fan Company
10-1. Restore power at the main electrical panel and turn on the wall
switch. e light kit should turn ON. To dim the light, hold the
light button down until you reach your desired brightness. Push
the light button again to turn o the light.
Note: To turn on the light without the remote, turn o the wall
switch for 5 seconds, then back on. e light kit will turn on at
maximum brightness.
10-2. Press the remote control’s HIGH speed button. e fan should
start and reach its maximum speed.
Note: For everyday operation, leave the wall switch ON. If the
remote control will not be used for 5 days or more, turn the wall
switch OFF.
10-3. Ceiling fans work best by blowing air downward
(counterclockwise blade rotation) in warm weather to cool the
room with a direct breeze. In cold weather, having the fan draw
air upward (clockwise blade rotation) will distribute the warmer
air trapped at the ceiling around the room without causing a
draft.
10-4. For cleaning nishes, use a soft brush or lint-free cloth to prevent
scratching. A vacuum cleaner brush nozzle can remove heavier
dust. Remove surface smudges or accumulated dirt and dust
using a mild detergent and a slightly dampened cloth. You may
use an artistic agent, but never abrasive cleaning agents as they
will damage the nish.
10-5. e blades on this fan have been treated with Hunter’s Dust
Armor protection, making the blades less likely to attract dust
and dirt. Use a dry or slightly damp lint free cloth to clean the
blades. Do not use a furniture polish or any other cleaners that
leave any residue, as they will damage the protective Dust Armor
on the blades.
In warm weather, use
downward air ow pattern
In cold weather, use upward
air ow pattern
To Change Airflow Direction
Remove glass. Turn switch to the opposite
position. Replace glass.
10 • Operating and Cleaning Your Ceiling Fan