Personal Space Air Cleaner SOLO2 Owner’s Guide English MODELS 30035, 30036, 30038, 30039 Form# 43051-01 2010 ©2010 Hunter Fan Co. ©2008 Hunter Fan Co.
. Before using the SOLO2, extend the cord and inspect for any signs of damage. DO NOT use the product if the cord has been damaged. Table of Contents Safety Instructions �����������������������������������������������������������������2 Introduction ����������������������������������������������������������������������������2 3. ALWAYS UNPLUG the SOLO2 from your computer and power source while it is being cleaned.
• Filter Counters: Filter maintenance is critical to the performance of the SOLO2. To help you determine when to change the HEPAtech® filter, the software has a built in life counter to keep track of the life remaining on the filter. Air Filtration System How the HEPAtech® System Works Air is pulled in through the bottom of the unit where particles such as dust, dander, and pollen collect on the HEPAtech® filter, leaving the air emitted from the front of the SOLO2 clean and fresh for your personal space.
Solo2 Components Computer Operation Launching the Control Console FILTER CHECK (AMBER LED) To launch the Control Console for Windows, click your Start button then choose All Programs, SOLO2 folder, SOLO2. On an Apple Computer click the SOLO2 icon on your file dock or browse to Hard Drive, Applications, SOLO2. TOUCH INDICATOR (BLUE LED) FILTER RESET Features and Settings Your SOLO2 Personal Air Cleaner has many useful features you can take control of in the product software.
Features and Settings (Cont.) NOTE: While recording your programs, your My Air Time button will be red and “Recording” will show at the bottom of the interface. When your unit is not recording a program but does have a program active, that programs time frame will be displayed at the bottom of the SOLO2 interface and your My Air Time button will be blue. Hunter Fan Web Site: Provides a convenient link to www.hunterfan.com for technical support, ordering information, and owner’s manual information.
Air Cleaner Maintenance Manual Operation Cleaning Your SOLO2 Air Cleaner has the ability to work separately from your computer. Turn the SOLO2 off, unplug your USB cable from SOLO2, and unplug the Power Adapter from the wall. You may now move the SOLO2 to anywhere in your home or office. Proper maintenance of your Hunter Air Cleaner will help ensure years of trouble free service. Follow these steps to properly maintain your air purifier: 1.
5. Align the bumps on the hinges on the wire base with the holes on the bottom of the unit. Ensure the hinge guide is facing inward of the holes the hinges rest in and snap into place. Make sure once seated that the bumps on the hinges are seated securely in the holes on the bottom of the SOLO2. Figure 8. 3. Place your fingers in the slots the hinges came out of on either side of the unit and pull the filter out. Figure 7. 6. Set your SOLO2 upright again and connect the power. 7.
Installation is deemed to occur at the date of purchase. 5. I need to replace the USB cable, power adapter, or CD. If the Air Cleaner cord or wire base fails any time within one (1) year after installation due to a defect in material or workmanship, we will replace or, at our option, repair the unit free of charge at our nearest service center or at our Service Department in Memphis, Tennessee. You will be responsible for all parts and labor costs after this one-year period.
Other Home Comfort Products From Hunter 38114, 1-888-830-1326. For the name of our nearest authorized Hunter Fan Company Service Center, write to the Hunter Fan Company at the preceding address. You will be responsible for insurance and freight or other transportation to our factory service center. We will return the Air Cleaner freight prepaid. The Air Cleaner should be properly packaged to avoid damage in transit since we will not be responsible for any such damage.
©2010 Hunter Fan Co.