Owner’s Manual English Models 44273 44279 5 MINUTE I N S T A L L A T I O N 5-1-1Programmable Weekdays-Saturday-Sunday Form# 44129-01 20120723 ©2012 Hunter Fan Co.
Table Of Contents At A Glance Know Your Thermostat ��������������������������������������������������������������������������������������������������3 Setup Setting Day and Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Know Your Thermostat Your thermostat has been pre-programmed from the factory with no programming necessary. We recommend using these pre-programmed settings for a few days before altering them as they offer maximum energy saving benefits. If you do decide to alter your programs, use the charts on page 13 to write out your scheduled times and temperatures. After you have recorded your preferences, follow the instructions on page 14 to alter your temperature settings.
Know Your Thermostat 1. Allows Schedule Setup for altering scheduled programs. 2. Sets the Save Away feature for when you will not be home during a regularly programmed time. 3. Confirms completion of an action or returns you to the Home screen. 4. Allows access to the advanced features of the thermostat. 5. Moves you forward or backward while setting up features or schedules. 6. Adjusts time and temperature settings as well as moving up or down menu lists. 7.
Know Your Thermostat 1 Schedule 6 2 Save Away 5 Back 3 Done/ Home 4 5 Menu 7 Next 8 9 ©2012 Hunter Fan Company 10 5
Know Your Thermostat 1. Holds 2 “AA” Batteries. 2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based on the type of system you have. 3. Allows your thermostat to operate your HVAC system* properly by indicating the system type that you have. *Conventional System: Uses a condensing unit for cooling and a separate furnace system for heating. *Heat Pump System: Uses the condensing unit for both heating and cooling.
Know Your Thermostat 1 2 3 ©2012 Hunter Fan Company 7
Know Your Thermostat 1. Shows the current day of the week or weekend. 2. Indicates the thermostat is running in schedule mode. 3. Will show when your heat pump or system is reporting a problem to the thermostat. 4. Indicates the current room temperature. 5. C will display when in Celsius mode. Nothing will display when set to Fahrenheit. 6. Flashes when the furnace filter should be checked for replacement. 7. On when the current schedule period is running. 8. Indicates the current active schedule period. 9.
Know Your Thermostat 1 2 3 7 8 At Home Wed 70 5 o C Auto 11 4 10 9 13 10:05 12 P Filter 6 Heat to 16 14 o 72 15 ©2012 Hunter Fan Company 9
Setting Day and Time Once you install the batteries, the thermostat will prompt you to set the current day and time. 1. You will notice that “Mon” will be flashing at the top left of your screen. Use the or buttons to move to your current day of the week and press the Next button to advance to the next step. 2. Use the or button to change between am(A) and pm(P). Choose Next to advance. 3. Next you will select your current hour by using the The Next button advances you to the next step. or buttons. 4.
Setting Day and Time 5 1-4 Mon Schedule Schedule Save Away A Done/ Home Back COOL 12:00 OFF HEAT Set Menu AUTO Save Away Updated! Done/ Home Back Next ON COOL ©2012 Hunter Fan Company OFF HEAT Menu AUTO Next ON 11
Scheduling Introduction Read the scheduling section thoroughly to ensure you understand your scheduling options and which will best fit with your lifestyle. The following notes should help you with scheduling: • The schedule time can be set in 15 minute increments, and remains the same for both Heat and Cool programs. • The scheduled temperature can be set in increments of 1°F (1°C).
Personal Scheduling Charts Default Schedule Day Monday-Friday Saturday Sunday Away Start Time: 8:00am End Time: 6:00pm Heat Temp: 60OF (16OC) Cool Temp: 85OF (29OC) Start Time: 8:00am End Time: 4:00pm Heat Temp: 60OF (16OC) Cool Temp: 85OF (29OC) Start Time: 8:00am End Time: 4:00pm Heat Temp: 60OF (16OC) Cool Temp: 85OF (29OC) Asleep Start Time: 10:00pm End Time: 6:00am Heat Temp: 60OF (16OC) Cool Temp: 82OF (28OC) Start Time: 10:00pm End Time: 6:00am Heat Temp: 60OF (16OC) Cool Temp: 82OF (28OC) Start T
Setting Your Schedule 1. Press the Schedule button to enter Scheduling mode. 2. Use the or Scheduling. buttons to select “On” and then Next to move forward to Note: If you do not wish to use the scheduling option on your thermostat, refer to page 20, step 2. 3. Monday thru Friday will be flashing on the screen. To proceed scheduling your weekdays, press Next .
Setting Your Schedule 11 2 Wed 70 Schedule At Home Save Away P Done/ Home Back COOL 12:05 OFF HEAT o Schedule Auto 72 Menu On Off Heat to Save Away Next AUTO Done/ Home Back ON 3 COOL OFF HEAT Menu Next AUTO ON 4 Mon Tu Wed Th Fri Sa Su Mon Tu Wed Th Fri Schedule Schedule Save Away Save Away Done/ Home Back COOL OFF HEAT Menu AUTO Next Away Asleep At Home Done/ Home Back ON COOL ©2012 Hunter Fan Company OFF HEAT Menu AUTO Next ON 15
Setting Your Schedule 5. Use the or buttons to adjust the start time on the left of the screen for the period and press Next . Again you will use the or buttons to adjust the end time on the right of the screen for this scheduled period. Press Next again. 6. Set the temperature for your heating cycle as indicated by the flashing heat to arrow on your screen. Use the and buttons to change the temperature and press Next .
Setting Your Schedule 5 6 Mon Tu Wed Th Fri Save Away A 8:00 OFF Away Asleep At Home Schedule to 4:30 Done/ Home Back COOL Mon Tu Wed Th Fri Away Asleep At Home Schedule Next Menu HEAT Save Away P AUTO A ON COOL 8:00 to o Heat to 4:30 P Cool to Done/ Home Back 7 80 OFF Menu HEAT Next AUTO ON 8 Mon Tu Wed Th Fri Save Away A 8:00 Done/ Home Back COOL Mon Tu Wed Th Fri Away Asleep At Home Schedule OFF HEAT Away Asleep At Home Schedule to 4:30 Save Away
Temporary Temperature Change With Temporary Temperature Change you have the ability to alter the temperature for only the current running schedule. 1. Press the or will come on. 2. Use the 3. Press the or Done/ Home button once to activate the screen, the backlight buttons again to select a new temperature. button to save changes. Note: Temporary Temperature Change is not a permanent setting. Your thermostat will only run the new temperature until the next scheduled period change.
Temporary Schedule Change 1 2 Tu Schedule At Home Save Away A OFF Schedule At Home Heat to 10:05 72 Done/ Home Back COOL 80 Tu o o Next Menu HEAT Save Away AUTO A COOL 10:05 Done/ Home Back ON 80 OFF HEAT o Heat to o 72 Menu AUTO Next ON 3 Tu Schedule At Home Save Away A 10:05 Done/ Home Back COOL 80 OFF HEAT o Heat to 72 o Menu AUTO Next ON ©2012 Hunter Fan Company 19
Turning Off Scheduling To turn off your schedule and have the thermostat permanently set to one temperature: 1. Press the button once. Schedule 2. Use the or button to switch to Off and select Done/ Home . 3. The screen will show “Updated!” and return you to the home screen. Note: You will notice the black bar on the screen beside the Schedule button is not displayed anymore. This indicates, no schedule is set to run. You can see the difference between figure 1 and 4. 4.
Turning Off Scheduling 1 2 Mon Schedule At Home Save Away P 7:50 Done/ Home Back COOL 72 OFF HEAT o Schedule Auto 71 o Menu On Off Heat to Save Away Next AUTO Done/ Home Back ON COOL OFF 3 4 Schedule Schedule Save Away Save Away Next Menu HEAT AUTO ON Mon Updated! Done/ Home Back COOL OFF HEAT Menu AUTO Next 72 P Done/ Home Back ON COOL ©2012 Hunter Fan Company 7:50 OFF HEAT o Auto Heat to o 68 Menu AUTO Next ON 21
Save Away The Save Away feature allows you to set a lower or higher temperature for time you will be away from your home outside of your normal Away schedule. This can include days you will be away for vacation, or a few hours away from your home. The Save Away feature can be set for as little as 1 hour or as much as 30 days. To set the save away feature: 1. Press the Save Away button. 2.
Save Away 1 2 Mon Schedule At Home Save Save Away P 7:30 Done/ Home Back COOL 72 OFF HEAT o Schedule Auto Heat to o 72 Menu 3 Save Away Next AUTO COOL OFF 3 4 Schedule Schedule Mon Save Away Done/ Home Back COOL OFF HEAT Menu AUTO Next ON COOL ©2012 Hunter Fan Company AUTO 72 3 Hours Done/ Home Back OFF HEAT Next Menu HEAT Save Away Updated! o 65 Hours Done/ Home Back ON Heat to ON o Auto Heat to o 65 Menu AUTO Next ON 23
Alerts This chapter will outline the various alerts the thermostat will report to you and how to respond to them. 1. Low Battery: This icon will appear when your batteries are starting to run low on power and should be changed to avoid system interruptions, (Figure 1) Change the batteries by gripping the sides of the thermostat firmly and pulling straight back, (Figure 1a). The batteries are located on the backside of the thermostat. The thermostat requires 2 (AA) batteries to operate.
Alerts 1a 1 Mon Schedule At Home Save Away A 7:15 Done/ Home Back COOL 69 OFF HEAT o Auto Heat to o 72 Menu Next AUTO ON 2 1b Mon Schedule Schedule At Home Save Away Save Away Done/ Home Back COOL OFF HEAT Menu AUTO Next P ON COOL 7:15 Done/ Home Back ©2012 Hunter Fan Company 71 OFF HEAT o Filter Auto Heat to o 72 Menu AUTO Next ON 25
Alerts 3. Auxiliary Heat: On multi-stage heat pumps this alert indicates your second stage heat is running.
Alerts 3 Mon Schedule At Home aux Save Away Done/ Home Back COOL 71 OFF HEAT o Auto Heat to o o 72 Menu AUTO Next ON ©2012 Hunter Fan Company 27
Menu Options Under your Menu options you have the ability to reset your filter counter, change your day/time settings, and change first and second stage spans. To change each setting, you will need to hit the Next button to move through each feature. To access these options: 1. Press the button. Menu 2. If you need to reset your filter indicator on the screen use the or buttons to select “Y”. If you need to make no other changes press to return to the home screen, otherwise press Next .
Menu Options 1 2 Mon Schedule At Home Save Away Back COOL OFF 71 o yn Heat to o aux 72 Done/ Home Menu HEAT Schedule Auto re Save Away Next AUTO Done/ Home Back ON COOL OFF HEAT Filter set Menu AUTO Next ON 3 Mon Schedule Save Away A Done/ Home Back COOL 12:00 OFF HEAT Set Menu AUTO Next ON ©2012 Hunter Fan Company 29
Menu Options 4. The next Menu option is to set your thermostat’s primary span. Use the or buttons to adjust between 1, 2, or, 3 degrees. Press Next after this has been changed or if no changes are necessary. The span setting regulates when and how long your system will run. The span has been set at the factory to 1 which will allow the system to turn on 1OF (.05OC) above or below the set temperature and run for 1OF (.05OC) above or below the set temperature.
Menu Options 4 5 o Schedule 1 Save Away spa Done/ Home Back COOL OFF HEAT o Schedule N 1 Menu 1 spa Save Away Next AUTO Done/ Home Back ON COOL OFF HEAT n 2 Menu AUTO Next ON 6 Schedule temp Save Away Done/ Home Back COOL OFF HEAT F Menu AUTO Next ON ©2012 Hunter Fan Company 31
Additional Features Armchair Programming There is no need to stand at the wall where the thermostat is mounted while programming or changing settings. Simply remove the thermostat from the wall and make the necessary changes in the comfort of a chair. You can also set your programming and settings before you even install the thermostat. Blue Backlight Your thermostat has a blue LED lamp that backlights the display for easy viewing in the dark. When any key is pressed, the backlight will be activated.
Troubleshooting and Support Problem: No display. Solution: 1. Check battery position and battery life. Problem: Program does not change at desired setting. Solution: 1. Check the time in all programs for proper am/pm time. 2. Ensure thermostat is not in “Save Away” mode. 3. Make sure the thermostat is set to the proper day. Problem: Auto / Fan does not turn on. Solution: 1. Move HG/HE switch to opposite position. 2. Check the fan setting and make sure that it is not set to off.
Troubleshooting and Support Problem: Fan runs continuously. Solution: 1. Check fan setting to see if it is set to on. 2. Move HG/HE switch to opposite position. Problem: Heating or cooling does not turn on or off. Solution: 1. Check the system is in the right mode (heat or cool). 2. Be sure to wait up to 3.5 minutes for system protection if your system was just on. 3. Check breakers to make sure power is getting to your system. 4. Replace the batteries. Problem: Backlight does not come on. Solution: 1.
Troubleshooting and Support Technical Support If you need any assistance with installation or setup of your new Hunter thermostat, please call us. Our technical support staff is ready to help! USA: 1-888-830-1326 Canada: 1-866-268-1936 Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00 am to 5:00 pm on Saturday, Central Time. You may also contact us over the Internet at www.HunterFan.com.
1 Year Limited Warranty Hunter Fan Company Thermostats LIMITED WARRANTY The Hunter Fan Company warrants your Hunter Thermostat to be free from defects in material or workmanship for a period of one year from the date of sale to the original user or consumer purchaser. If your Hunter Thermostat malfunctions or fails within the warranty period because of a defect in material or workmanship, we will replace it. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES.
1 Year Limited Warranty This warranty neither applies to batteries nor to deterioration of, nor damage to the product caused by the use of faulty batteries. Return your product, along with proof of purchase to Hunter Fan Company Service Department, 7130 Goodlett Farms Pkwy Suite 400, Memphis, TN 38016. You will be responsible for all insurance and freight or other transportation charges to our factory. We will return your Hunter Thermostat freight prepaid.
