Use and Care Manual

44126-01 • 07/30/2012

Setting Day and Time

Once you install the batteries, the thermostat will prompt you to set the current day

and time.

1. You will notice that “Mon” will be ashing at the top left of your screen. Use the

or buttons to move to your current day of the week and press the

button to

advance to the next step.

2. Use the or button to change between am and pm. Choose

to advance.

3. Next you will select your current hour by using the or buttons. The

button

advances you to the next step.

4. Set your minutes using the or and press

Done/

Home

to nish or

Back

if you need to

make a correction to a previous step.

5. When nished, the thermostat will show “Updated!” to conrm your settings

are saved.

6. Your thermostat will next prompt you to set your programming, see page 14

step 2 if you wish to alter your programs at this time.