Use and Care Manual

44126-01 • 07/30/2012

* The schedule time can be set in 15 minute increments, and remains the same for both Heat

and Cool programs.

* The scheduled temperature can be set in increments of 1°F (1°C).

* After 15 minute without a key press, the thermostat will return to the home display screen.

* When setting the schedule time, note the AM / PM indicator.

* At any stage during your scheduling, you can use the

Back

buttons to move forward or

backwards through the steps.

Done/

Home

will save any changes, even if you have not scheduled or

altered all settings.

* Arrows beside each schedule mode and beside heat/cool modes will indicate which ones

are active.

Read the scheduling section thoroughly to ensure you understand your scheduling options and

which will best t with your lifestyle. The following notes should help you with scheduling:

Scheduling Introduction

This thermostat has been pre-programmed to provide optimal energy savings. No

programming is necessary. We recommend you run these programs for a few days before

adjusting your programming. If it is necessary to change these settings, use the scheduling

table on the next page to record your new settings. You will also nd the default schedule there

as well.