Use and Care Manual

44126-01 • 07/30/2012

Additional Features

There is no need to stand at the wall where the thermostat is mounted while programming

or changing settings. Simply remove the thermostat from the wall and make the

necessary changes in the comfort of a chair. You can also set your programming and

settings before you even install the thermostat.

Armchair Programming

Your thermostat has a blue LED lamp that backlights the display for easy viewing in the

dark. When any key is pressed, the backlight will be activated. The display will stay

illuminated for 15 seconds after the last key is pressed.

Blue Backlight

To protect your system from cycling, system turning on and off rapidly, your thermostat

will prevent your system from turning back on for up to 3.5 minutes after it has been

shut down.

System Protection

In situations where your thermostat may not seem to be operating properly or if you

just want to reset and start over, press and hold the and buttons for 3 seconds

until the screen ashes “Updated!”. This will restore the thermostat to factory condition.

Reset