User's Manual

44040-01 • 03/24/2010

Setup

Setting Day, Time, and System

Once you install the batteries, the thermostat will prompt you to set the current date,

time, and system type.

1. “01” for current day will be ashing. Use the or button to select your current day,

then

to move to month, and then year, until each is set.

will advance you to time

setup.

2. Use the the

or buttons to set the current time of day, AM or PM and then use

advance to hours, and again to set minutes. Pressing

again will advance you to system

setup.

3. Press [conventl] or [heat pump] to select your system type. You may also use the

buttons to make your selection.

Note: At anytime, if you see the

icon on the screen, you can press it for more

information about that setup, scheduling step, or menu option.

4. If you selected [conventl], select [gas/oil] or [electric] as your furnace type.

Note: Furnace type should be [electric] for heat pump systems.

5. Press

. Choose [Schedule] if you want to setup your schedules or [manual] to set

one temperature and ignore scheduling. Press

and See “Setting Your Schedule”

on page 12 if you chose [Schedule] or use the or buttons to set your temperature

and press

Done

for [manual] mode.