Installation Guide

5
6
1886
1886
Rotate the fan motor upside down and place into one of the cavities in the
packaging. Ensure the motor is stable in the packaging cavity.
Rotate the blade assembly and align with the motor.There are ve pairs of holes in
the fan. Lift the blade assembly into position. Align the holes in the blade assembly
with the holes on the fan. It does not matter which hole you choose. Install the
blade assembly screws found in the hardware bag , to secure the blade iron to
the fan. Hand tighten the screws.
Rotate the fan right side up and place into one of the cavities in the packaging. Ensure the fan is stable in the packaging cavity.
Installing the Blades:
1
STEP
2
STEP
3
STEP
NOTE: Make sure blade assembly is installed to the
right holes. Installing it incorrectly could result in your
fan not functioning.
IMPORTANT
Ceiling Bracket Downrod Hanging Fan Wiring CanopyBlades Cap TroubleshootingRemote
5 of 11
bag
Blade Screw
WARNING
FAN FALL HAZARD
Make sure screws are tight to secure the upper
switch housing to the mounting plate.