Installation Sheet

7
1886
1886
Ceiling Bracket Hanging Fan Wiring Installing Fan Body Blades Light Remote
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy
Screw
Installing the Blades
Put the blade washers, found in the hardware bag, onto the
blade screws, found in the hardware bag. Then install the
blade screws to secure each blade to a blade iron.
Repeat x7
x21
x21
bag
bag
Blade Screw
Washer
Fan style may vary.
Note:
Lightly attach the blade arms to the motor with screws
found in the hardware bag, then securely tighten
after both screws are attached.
Repeat x7
x14
bag
Blade Arm Screw
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
Ridge
Fan style may vary.
Note:
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.