User Manual

SETTING PROGRAM START TIMES

1. Turn the dial to the START TIMES position.

2. Press the PRG button to select A, B, or C.

3. Use the+and - buttons to change the start time. (Advances

in 15-minute increments.) One start time will activate all

stations sequentially in that program. This eliminates the

need to enter a start time for each station.

4. Press the→button to add another start time,

or PRG button for the next program.

Eliminating a Program Start Time

With the dial set to the START TIMES position, push the + and -

buttons until you reach 12:00  (Midnight). From this position

push the - button once to reach the “OFF” position.

Setting Program Start Times

NOTE: All stations operate in numerical

order. Only one program start time is

required to activate a watering program.

If a program has all four start times turned

off, then that program is off (all other

program details are retained).

Because there are no start times, there will

be no watering with that program.