User Manual

SETTING A WATERING SCHEDULE

1. Turn the dial to the WATER DAYS position.

2. The display will show the last program selected (A, B,

or C). You can switch to another program by pressing the

PRG button.

3. The controller displays currently programmed active day

schedule information. You can choose to water on specific

days of the week, or you can choose interval watering, or

choose to water on odd days or even days. Each program can

operate using only one type of water day option.

Selecting Specic Days

of the Week to Water

1. Press the + button to activate

a particular day of the week

to water (the display always

starts with Monday). Press

the - button to cancel watering

for that day. After pressing a

button, the display automati-

cally advances to the next day.

A icon indicates a water day.

A icon indicates a no water day.

2. After programming, set dial

to the RUN position to enable

automatic execution of all

selected programs and start

times.

Selecting Odd or Even Days to Water

This feature uses numbered day(s) of the month for watering

instead of specific days of the week (odd days: 1st, 3rd, 5th, etc.;

even days: 2nd, 4th, 6th, etc.)

1. With the cursor on SUN in specific days of the week mode

press the → button once. ODD will flash on the screen.

2. If even day watering is desired, press the - button once. EVEN

will flash on the screen. You can move back and forth from

ODD to EVEN by pressing the - button.

3. Once you selected odd or even day watering, turn the dial

back to the RUN TIMES position.

Setting a Watering Schedule

NOTE: The 31st of any month and February

29th are always “OFF” days if Odd day

watering is selected.