User Manual

CLIK DELAY INSTRUCTIONS

Clik Delay Feature

This feature allows the user to delay programmed waterings for

a designated period (from 1-7 days) AFTER a Clik Event ends.

At the end of Programmed Clik Delay period, the controller will

resume normal automatic irrigation.

1. Turn the dial to the RUN Position

2. Press and hold the “+” button for 3 seconds, then turn the dial

to the OFF position

3. Release the “+” button. The display will show the program-

mable Clik Delay.

4. Press the “+” button to set Clik Delay duration (from 1 to 7 days).

5. Return the dial to the RUN position. Clik Delay is set.

After a Clik Event ends (rain sensor changes from wet to dry) the

Clik Delay feature will become active and the screen will display

Clik Delay duration. The day count down will occur 24 hours

after the start of Clik Delay.

An active Clik Delay can be cancelled by turning the dial to the

OFF position, waiting for OFF to stop flashing, then turning the

dial back to the RUN position.

Any station that is set to override sensor, as well as Lighting

Programs, will operate during a Clik Delay event.

NOTE: Use caution when using the program-

mable Clik Delay feature with Hunter Wind-Clik,

Freeze-Clik, Soil- Clik, and freeze component

of Solar Sync and Rain/Freeze Clik as the Clik

Delay will become active AFTER Clik Event from

these devices.

SENSOR DAYS LEFT