Full Product Manual

www.HunterFan.com
1.888.830.1326
14
M0049-01 • 09/11/15 • © 2012–2015 Hunter Fan Company
Switch Housing (continued)
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light xture falling.
Connect the plugs from the upper and
lower switch housings. Make sure to line up
the colored markings on the connectors.
Attach the pull chain pendant to the short
chain coming from the switch housing.
Lift the lower switch housing until its
screw holes are aligned with the screw
holes in the upper switch housing. Install
the three switch housing screws, found
in the hardware bag. Tighten all
three screws.
14