Digital Digita igi al Ceram Ceramic Heater With Remote Control 2 2ZQHU V 0DQXDO English Model
TABLE OF CONTENTS 2 81613-01 R20180720
INTRODUCTION Thank you for choosing the Hunter Ceramic Heater. This manual gives you complete instructions for using your heater. SAFETY AND WARNINGS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! SAVE THESE INSTRUCTIONS FOR REFERENCE.
11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. 12. A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored. 13. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, injury to persons, or other damage to property. 14.
3$576 2) 7+( +($7(5 6 Parts of the Heater Symbols 2 3 1. Control Panel Power Button 2. LED Display H/L Heat Button 3. Safety Grille Oscillation Button 4. Base High Temperature Setting Button 5. Remote Control Low Temperature Setting Button 6. Power Light Timer Button (Figure 1) 1 5 4 Figure 1 (Figure 2) 23(5$7,1* ,16758&7,216 Operation 1. Place the heater on a firm, level surface, after assembling per this manual.
8. To turn the heater OFF, press the Power Button . The unit will first turn off the heating elements, the fan will be shut down 30 seconds later. Unplug the unit by pulling the plug from the electrical outlet only after the fan stopped. Oscillation Pressing the Oscillation Button will allow the heater to oscillate back and forth. To stop the oscillation, press the Oscillation Button again.
Remote Control (Figure 6) 1. The remote control uses two (2) "AAA" batteries (not included) for operation. 2. All the functions performed using buttons on the Remote Control work identically to the buttons on the Control Panel, except that you must use the and buttons on the Control Panel to switch between Celsius and Fahrenheit temperature reading. Note: Change the batteries with new and same types if the remote control does not operate well. Otherwise your remote control may not operate properly.
0$,17(1$1&( 1. Press the Power Button to turn the heater OFF and unplug the heater before moving or cleaning. 2. Interior dust can often be removed by using a vacuum cleaner with a crevice tool attachment. 3. To clean the enclosure, use a clean, soft and lightly damp cloth to gently wipe off the dirt from the surface of the unit. Be sure not to wet the Heating Element and the switches. Allow the unit to dry completely before use. 4. Do not use cleaning liquid or other chemicals to spray on the unit.
FCC WARNING FCC WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
y nt ra ar W IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RESPECT TO THE GLASS GLOBES OR LIGHT BULBS OR THE FINISH ON ANY METAL PORTION OF THE HEATER. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES.
